Product Highlights
Tenda-TEF1118P-16-150W Switch 16FE+2GE/1SFP Desktop Switch With 16-Port PoE. It is established on the original bent pair, it can support up to 250 meters of long-distance transmission, breaking a hundred meters transfer limit. It gives a 6KV lighting protection PoE switch is the real monitoring private switch. Tenda-TEF1110P-8-102W Switch Ports 1-8 support IEEE 802.3at and IEEE 802.3af PoE standard and has a high level of security transmission power. Output capacity of this Tenda-TEF1109P-8-63W PoE it's about 150W which is the maximum power supply and 30W for a single port. Power is supplied when data transmitting with APs, IP cameras, and IP phones. Cascading with 6 Devices which Support IP Surveillance Project of up to 96 Cameras. With one 10/100/1000 Mbps combo SFP slot, the switch can meet the current demand for uplink bandwidth of Gigabit WLAN and HD digital surveillance Tenda-TEF1110P-8-102W Switch work with Tenda optical fiber module TEG311SM. The distance of the transmission is Up to 20 meters, beyond a hundred meters transfer limit. With the help of gigabit linked to SFP port, it can get the demand of transmission data to a few tens of kilometers. It provides a dual gigabit uplink port to meet the needs of more equipment cascading and access. And the test standards are far higher than the requirements of the state CCC. Dedicated to Surveillance & SMB Networking. GE & SFP uplink ports Large Buffer of Nearly 3M.
What's in the box: Tenda-TEF1118P-16-150W Switch 16FE+2GE/1SFP Desktop Switch With 16-Port PoE
| Brand: | Tend |
| Model: | TEF1105P-4-63Wv2.0 |
| Certification: | 3C, FCC, CE, RHOS |
| Type: | Wireless |
| Standard&Protocol: | IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.3af/at |
| Indicator: | Link/Act, PoE Status, Power, 1000M |
| Fixed Port: | 8* 10/100Base-TX RJ45 Ports (Data/Power); 2* 10/100Base-T RJ45 Port (Data) |
| Meantime between failures (MTBF): | ≥50,000 hours (about 5 years) |
| Interface: | 16 * Link/Act LEDs, 1 * G1 LED, 1 * G2/SFP2 LED, 1 * PoE-MAX LED, 1 * Power LED |
| Lightning Protection: | ≥6KV |
| MAC Address Table: | 4KStore & Forward: Yes |
| Wire-speed forwarding: | Support |
| Switching capacity: | 7.2Gbps |
| Packet Forwarding Rate: | 5.36 Mpps |
| Power Consumption: | 150W output the whole device |
| PoE supply: | Ports 1-16 support standard IEEE802.3af/at, 30W output per PoE port, 130W output of the total PoE Power |
| Power Input: | 100-240V~50/60Hz (AC) |
| Dimension: | 294*178.8*44mm |
| Power Consumption: | 63W (in full configuration), 58W (PoE Max Power Supply) |
| Operating Temperature: | 0℃~40℃ (32℉~104℉) |
| Storage Temperature: | -40℃~70℃ (-40℉~158℉) |
| Operating Humidity | 10%~90% non-condensing |
| Storage Humidity: | 5%~90% non-condensing |
| Standard Mode: | A default mode of the switch. In this mode, it works as an unmanaged switch all ports can communicate with each other separately. |
| Priority Mode: | In this mode, ports G1 and G2/SFP2 serve as uplink ports, ports 1 – 8 serve as high priority ports. |
| All ports can communicate with each other separately. | |
| Extend: In this mode, the data rate of ports 9 - 16 reduces to 10 Mbps, the maximum transmission distance can be 250 meters, and all ports can communicate with each other. | |
| VLAN Mode: | In this mode, ports 1 - 16 of the switch can communicate with ports G1, G2/SFP2 separately, but cannot communicate with each other. |
| You can enable this mode to reduce broadcast storms and isolate the DHCP broadcast. |
Product doesn't have any reviews yet!
