April 26, 2024, 12:41 am

Tenda-TEF1126P-24-250W Switch 24 10/100Mbps +1 GE/SFP Slots Switch With 24-Port PoE

Product Highlights

  • CCTV, Standard, VLAN, and Extend Operation Modes Offered
  • Tenda-TEF1118P-16-150W Switch is compliant with IEEE 802.3af and IEEE 802.
  • Support up to 250 meters for data transmission.
  • It supports wide voltage input, AC:100-240V~50/60Hz.
  • It gives a 6KV lighting protection PoE switch is the real monitoring private switch.
  • It has a high level of security transmission power. 99W PoE power supply simplified wiring.
View Details
Delivery Address
Normally delivered in 2-3 days.
Enter Address for exact delivery details.
Free pickup today
Cash on Delivery
E-Wallet
Bank Transfer
7 days replacement

Tenda-TEF1126P-24-250W Switch 24 10/100Mbps +1 GE/SFP Slots Switch With 24-Port PoE. It is established on the original bent pair, it can support up to 250 meters of long-distance transmission, breaking a hundred meters transfer limit. Dedicated to Surveillance & SMB Networking. GE & SFP uplink ports Large Buffer of Nearly 3M. It gives a 6KV lighting protection PoE switch is the real monitoring private switch. Tenda-TEF1110P-8-102W Switch Ports 1-8 support IEEE 802.3at and IEEE 802.3af PoE standard. CCTV:1-8 ports support QoS If multiple IP cameras are connected to the switch, you are recommended to enable this mode and connect the G1 or SFP1 port of this switch to the upstream device like the monitoring computer. This ensures smoother monitoring video playback. Standard:The switch’s functions are similar to a common unmanaged switch’s and all the ports of the switch can communicate with each other. VLAN: In this mode, 1-24 ports of the switch cannot communicate with each other but can communicate with the G1 and SFP1 ports. It can be used typically to broadcast storms and DHCP broadcasts. Extend: In this mode, the data rate of 1-8 port is limited to 10 Mbps. The distance of the transmission of data is Up to 250 meters, which is the maximum data transfer rate. Easy to communicate with each other with all types of ports. Tenda-TEF1126P-24-250W is tested in a standard way so its requirements are very higher than the state CCC. With the help of gigabit linked to SFP port, it can get the demand of transmission data to a few tens of kilometers. It has a dual gigabit uplink port to meet the needs of more equipment cascading and access. Maximum Power is supplied when data transmitting with APs, IP cameras, and IP phones. Cascading with 6 Devices which Support IP Surveillance Project of up to 96 Cameras. With one 10/100/1000 Mbps combo SFP slot, the switch can meet the current demand for uplink bandwidth of Gigabit WLAN and HD digital surveillance.

What's in the box: Tenda-TEF1126P-24-250W Switch 24 10/100Mbps +1 GE/SFP Slots Switch With 24-Port PoE

Brand:  Tend
Model:  TEF1105P-4-63Wv2.0
Certification:  3C, FCC, CE, RHOS
Type: Wireless
Standard&Protocol: IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.3af/at
Indicator:  24*Link/Act per device, 1*G1 Link/Act per device, 1*SFP Link/Act per device, 1*PoE-MAX per device, 1*Power per device
Fixed Port: 8* 10/100Base-TX RJ45 Ports (Data/Power); 2* 10/100Base-T RJ45 Port (Data)
Meantime between failures (MTBF): ≥50,000 hours (about 5 years)
Interface: 24 10/100Base-TX ports (Data/Power), 1 10/100/1000Base-T port (Data), 1 1000Base-X SFP port
Lightning Protection: 6KV
MAC Address Table: 4K
Store & Forward:  Yes
Wire-speed forwarding:  Support
Switching capacity:  8.8Gbps
Packet Forwarding Rate: 6.55Mpps
Power Consumption: <250W (in full configuration), 225W (PoE Max Power Supply)
PoE supply:  Port 1 to Port 16 support IEEE802.3at/af POE standard
PN pass-through: 1 2 4 5 +,3 6 7 8 -
Power Input:  100-240V~50/60Hz (AC)
Dimension: 94*215*44mm (WxDxH)
Power Consumption: 63W (in full configuration), 58W (PoE Max Power Supply)
Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature:  -40℃~70℃ (-40℉~158℉)
Operating Humidity 10%~90% non-condensing
Storage Humidity:  5%~90% non-condensing
CCTV: 1-8 ports support QoS If multiple IP cameras are connected to the switch, you are recommended to enable this mode and connect the G1 or SFP1 port of this switch to the upstream device,like the monitoring computer. 
  This ensures smoother monitoring video playback.
Standard:  The switch’s functions are similar to a common unmanaged switch’s and all the ports of the switch can communicate with each other.
VLAN:  In this mode, 1-16 ports of the switch cannot communicate with each other but can communicate with the G1 and SFP1 ports.
  It can be used to isolate broadcast storms and DHCP broadcasts.
Extend: In this mode, the data rate of 1-8 port is limited to 10 Mbps, whereas the maximum transmission distance of the port is increased to 250 meters. 
  All the ports of the switch can communicate with each other.
Show More

Product doesn't have any reviews yet!

Added To Wish List
Removed from Wish List
Added To Cart
Removed from Cart
OTP Sent